#

MIG WELDING MACHINE

MODEL  JK-MIG-200 JK-MIG-250 JK-MIG-300 JK-MIG-400 JK-MIG-500 JK-MIG-600
Rating in Amperes 200 250 300 400 500 600
Maximum automatic continuous welding current in amp at 100 % duty cycle  145 190 220 310 415 510
Maximum automatic continuous welding current in amp at 85 % duty cycle  90 150 250 350 450 550
Type of metal which can be welded  Mild Steel Mild Steel Mild Steel Mild Steel Mild Steel Mild Steel
Current rating of torch at 60 % duty cycle  200 250 300 400 500 500
Wire feed speed in mm/min 12 12 15 18 18 20
Diameter of wire with range in mm 0.8 to 1.2 0.8 to 1.2 0.8 to 1.2 0.8 to 1.2 0.8 to 1.6 0.8 to 1.6
Length of torch in meters 2 2 3 3 4 5
Power supply Three phase 415v 50hz Three phase 415v 50hz Three phase 415v 50hz Three phase 415v 50hz Three phase 415v 50hz Three phase 415v 50hz
Type of cooling  Air cooling/Water Cooling Air cooling/Water Cooling Air cooling/Water Cooling Air cooling/Water Cooling Air cooling/Water Cooling Air cooling/Water Cooling
Type of insulation class  H/F H/F H/F H/F H/F H/F
Class of protection IP23 IP23 IP23 IP23 IP23 IP23
Type of end connectors  Euro/Pana Euro/Pana Euro/Pana Euro/Pana Euro/Pana Euro/Pana
#

MIG WELDING MACHINE

TECHNICAL SPECIFICATION 
MODEL JK-MWM-415
Technology  IGBT based Digital Inverter Technology
Input Power Supply  415 V +/- 10% , 3 Ph 50 Hz AC
Rated Power at Max Current  16 KVA – 18 KVA  60% duty cycle
Maximum Supply Current  27 A
Power Factor  0.88
OCV  47 – 80 V
Welding Current &Voltage  20 A– 400 A and 15V - 45V
Output Current @ 60% Duty Cycle (10 Min) 400 Amps
Output Current @ 100% Duty Cycle (10 Min) 310 Amps
Protection Class  IP 23
Insulation Class  H
Idle Power  20W
Fan on Demand  Inbuilt
Digital Error Code Over Temp , Over Voltage , Under Voltage
Operating Temperature  -10°C to +40°C
Crater Fill Option  Yes
Auto / Manual or 2T / 4T Selection Switch Yes
Specification - Wire feeder
Wire Feeder Unit 4 Roll Drive, Fully Enclosed Wire feeder made by insulated & non-inflammable material.
Norms  IEC 60974 -5
Gun Connection  Euro
Feeder Operation Voltage  24V
Protection Class  IP 23
Wire Feeding Speed  0 - 25m/min
Wire Feed suitable for filler Wire  Solid 0.6 - 1.6 mm & FC 0.8 - 2.0 mm
Wire Spool Dia. & Weight (max)  300 mm & 20 Kg 
Wire Feeding Voltage & Current  Yes Provided in wire feeder
Wire Inching switch (to avoid gas wastage) Yes
Gas Test Switch (to avoid wire wastage) Yes
Technical Data Welding Torch
Connection  EURO
Cooling  Air
MIG Torch Duty Cycle 60% @ 500 A for Mixed gas
60% @ 550 A for CO2