#

High Speed Precision Lathe Machine

MODEL JK-AGL-1000X600
Distance Between centers x Swing over Bed in mm 1000X600
Swing Over Bed in mm 575
Center Height in mm 260
Swing Over Cross Slide in mm 350
Swing Over Carriage Wing in mm 545
Swing in Gap in mm 800
Width of Gap in Front in mm 175
Type of Bed Inverted V type
Length of Bed in mm 2270
Width of Bed in mm 415
Gap in Bed in mm 0
Rapid Transverse of saddle & Cross Slide no
Maximum Feed Force 5000
Maximum Facing Diameter in mm 575
Maximum Weight of work piece that can be held between chuck and supported by Live center in kg 320
Maximum Weight of work piece that can be held between chuck and supported by dead center in kg 600
Maximum Torque on Spindle in NM 11
Type of Spindle Metric- 60
Size of Spindle in mm 165
Type of Spindle Nose A2-6"
Taper in Spindle Bore Metric- 60
Taper Bore in Spindle Sleeve Mt-5
Bore in Spindle in mm 53
Range of Spindle Speed in Forward Direction in rev/min 40-2040
Range of Spindle Speed in Reverse Direction in rev/min 60-1430
Type of Chuck 3 Jaw Self Centered
Travel of Cross Slide in mm 300
Travel of Top Slide in mm 150
Type of Tool Holder Square Shank
Tool Shank Size 25x25
Main Motor Power in kw 11
Rapid Traverse Motor Power in kw 0.75
Type of Cooling Natural Air cooling
speed of coolant motor in rev/min 2800
Noise emitted by Machine in db 85
power supply 3phase
Coolant Pump output in kw 0.12
Coolant Pump Discharge at maximum working height 30
Minimum Chucking Diameter in mm 10
Maximum Chucking Diameter in mm 250
Tail Stock Sleeve Diameter in mm 90
Tail Stock Spindle Taper Mt-5
Maximum Offset of Tailstock on either side of Center Line in mm 4
Sleeve Travel Type-Tail Stock Manual
Travel of Sleeve in mm 200
Hardness of Bed Guide Ways in HRC 45
Lead Screw Diameter in mm 36
Lead Screw Pitch in mm 6
Longitudinal Lead Screw Feed Range in mm/rev 0.04-2.24
Cross feed Range in mm/rev 0.02-1.12
Metric Thread Range in mm 0.5-14
British Thread Range in TPI 1-56
Module Thread Range in mm 14
Diameteral Pitch Range in mm 112
Type of Lubrication Dry Sump Lubrication
Length of Lathe Machine in mm 2465
Width of Lathe Machine in mm 1176
Height of Lathe Machine in mm 2300
Colour of Lathe machine Apple green