INJECTION MOULDING MACHINE
| Technical Specification | |
| MODEL | JK-IMM-28 |
| Screw Type Injection Moulding Machine | |
| Type | Vertical Injection Moulding |
| Screw Dia. | 28 mm |
| Injection Stroke | 110 mm |
| Stroke Volume | 65 cm3 |
| Max Injected Weight | 60 gm. |
| Injection Pressure | 1000 Kg/Cm2 |
| Screw L/D ratio | 16 |
| Maximum Screw Speed | 160 RPM |
| Closing Unit Clamping force | 20 |
| Maximum Day Light | 290 mm |
| Power Rating | 3 HP |
| FEATURES : Five-Points twin toggle system, Cold start protection for Screw, All other standard features of a high quality injection moulding machine, Accessories and Manual | |
INJECTION MOULDING MACHINE
| Technical Specification | |||
| MODEL | JK-IMM-5 | ||
| INJECTION UNIT | |||
| Unit | A | B | |
| Short Weight | ps | 65 | 75 |
| Screw Diameter | mm | 28 | 30 |
| Injection Pressure | bar | 1960 | 1840 |
| Injection Rate | cc/sec | 60 | 66 |
| L/D Ratio | L/D | 21 | 20.6 |
| Plasticizing Rate | gm/sec | 75 | 9.5 |
| Screw Stroke | mm | Max 110 | |
| Screw Speed | rpm | Max 350 | |
| Total Heating Capacity | kw | 5 | |
| System Pressure | bar | Max 150 | |
| CLAMPING UNIT | |||
| Clamping Tonnage | ton | Upto 50 | |
| Clamping Stroke | mm | Upto 250 | |
| Day Light | mm | Max 550 | |
| Mould Height | mm | 120-320 | |
| Size of Mould Platen | mm | Max 480 X 450 | |
| Tie Bar Distance | mm | Max 280 X 280 | |
| Tiebar Diameter | mm | Max 50 | |
| Locating Ring | mm | Max 90 | |
| Ejector Stroke | mm | Max 60 | |
| Ejector Force | ton | Max 2.1 | |
| OTHERS | |||
| Total Connected Load | Kw | 10.5 | |
| Servo Motor | Kw | Max 5.5 | |
| Oil Tank Capacity | Ltr | Upto 150 | |
| Machine Diamension (LXWXH) | meter | Max 3.5X1.2X1.7 | |
| Machine Weight Approx | Ton | Max 2.7 | |
| Hopper Capacity | Kg | Max 20 | |