#

Arbor Press

Arbor Press

MAKE : JK / MODEL : JK-AP-02

 

TECHNICAL SPECIFICATION
  • Single average type, quick action
  • Capacity – 2 Ton.
  • Revolving table with 4 different slot
  • Distance from centre of ram to column 160 - 200mm.
  • Admit arbor dia 50-60mm
  • Max opening 300-360mm
  • Material: Cast Iron
  • Heavy Duty
#

Bench Grinder JK-BG-35

Bench Grinder

MAKE : JK / MODEL : JK-BG-35  

TECHNICAL SPECIFICATION

Bench Grinder with suitable stand
  • Bench Grinder c/w stand
  • Wheel Hole Diameter (Φmm) (Right) 12.7, (Left) 12.7
  • Wheel Outer Diameter (Φmm) (Right) 150, (Left) 150
  • Wheel Thickness (mm) (Right) 19, (Left) 6.4
  • Suitable Whetstone (Right) A60P, (Left) A80P
  • No Load Speed :2850 rpm
  • Cable Length : 2 m
  • Power Input : Single phase 230V, 50 Hz, AC Mains
  • With protective eye shield & circular blade guide.
  • With table compatible with machine & suitable for working by trainees.
#

PLUMMER BLOCK JK-CIPB

PLUMMER BLOCK

MAKE : JK / MODEL : JK-CIPB

 

Cast Iron Plummer Block

To fit 50mm shaft Complete with plain split brass shells

#

Hydraulic Bench Press JK-HB-20

Hydraulic Bench Press

MAKE : JK / MODEL : JK-HB-20

 

TECHNICAL SPECIFICATION

Application: bend or straighten metal easily, loosen seized parts, replace bearings Technical Specification:

  • Material: Alloy Steel
  • Capacity: 20 tonnes
  • Maximum height of insertion: 360mm
  • Maximum width of insertion: 450mm
  • Hydraulic hand pump with pressure gauge
  • Ram stroke 75mm, spring return with flexible hose and fittings connected to hand pump and ram
  • Complete with ram pushing adaptor Ø18mm shank
  • 4 port design
  • Adjustable working Table
#

Hydraulic Bench Press JK-HB-04

Hydraulic Bench Press

MAKE : JK / MODEL : JK-HB-04

 

TECHNICAL SPECIFICATION
  • Hydraulic Bench Press 4 Tone
  • Material: Alloy Steel
  • Capacity :4 Tonne Capacity
  • Throat width: 350mm.
  • Throat depth (Bed to Ram): 291mm
  • Ram travel: 121mm.
  • Dimensions (LxWxH) 400x528x685mm
  • High pressure Hose
#

Mitre Handsaw JK-mh-90

Mitre Handsaw

MAKE : JK / MODEL : JK-mh-90

 

TECHNICAL SPECIFICATION

Key Features:

  • One-piece die cast aluminium saw table.
  • Four solid chrome plated guide rods with adjustable length stop.
  • Material vice clamp.
  • Extra material vice clamp for use with short work pieces
  • Cutting depth regulator.
  • Scale on base.
  • Plastic handle

Technical Specification:

  • 14 tpi wood cutting blade.
  • Max. cutting width clamped at 45°: 115mm
  • Max. cutting width clamped at 90°: 125mm
  • Max. cutting width unclamped at 90°:170mm
  • Max. cutting height: 100mm
  • Blade length: 550mm
  • Blade width: 45mm
  • Table length: 400mm
  • Max. reach of adjustable stop: 440mm

 

#

Powered Mitre Saw JK-pm-48