#

CNC Lathe Machine with FANUC Controller

Sr.No. Technical Specification of CNC Lathe Machine with FANUC Controller 
1 Description  
2 WORK AREA DIMENSIONS  
3 Swing over bed 500mm
4 Distance between centres 600mm
5 Turning dia. 300mm
6 Turning Length 600mm
7 MAIN SPINDLE  
8 Spindle nose A2-6
9 Bore through spindle 63mm
10 Bar capacity 51mm
11 Spindle Speed range 3500rpm
12 Spindle motor power (Continuous rating / 15 mins. rating) 11hp
13 AXES SLIDES  
14 X-axis Travel 150mm
15 Z-axis Travel 650mm
16 Rapid traverse: X-axis 24m/min
17 Rapid traverse: Z-axis 24m/min
18 Feed rate : 12m/min
19 TURRET  
20 Turret Type Servo Turret (Pragati BTP80)
21 No. of stations 8 Nos
22 Maximum Boring bar dia. 40mm
23 OD turning tool size 25mmx25mm
24 TAILSTOCK  
25 Tail stock Base travel 200mm
26 Tail stock Quill travel 90mm
27 Tail stock Quill diameter 80mm
28 Quill Taper MT-4
29 Quill thrust 300 kgf @ 12 kg/cm2 bar pressure
30 CONFIGURATION  
31 CNC CONTROL SYSTEM: Fanuc Oi TF or latest from FANUC
32 BED TYPE: True Slant
33 GUIDE WAYS: High precision roller LM guides ways
34 ACCURACIES  
35 POSITIONING  
36 X- AXIS: 0.010mm
37 Z - AXIS: 0.010mm
38 REPEATABILITY  
39 X- AXIS: 0.006mm
40 Z - AXIS: 0.006mm
41 Run out: 0.005mm
42 COOLANT SYSTEM  
43 Tank capacity: 60 ltr capacity
44 LUBRICATION  
45 Central lubrication: Automatic lubrication for roller guide ways, ball screw.
46 Hydraulic power pack: 32 ltr
47 System Pressure: 30 kg/cm2 
48 STANDARD FEATURES  
49 Stress relieved casting for headstock and bed Yes Available
50 Hardened and ground Linear Motion guide ways Yes Available
51 Spindle encoder for thread cutting operation Yes Available
52 Hydraulic operated 3 Jaw chuck with one set of hard & soft jaws Yes Available
53 Minimum 8 station Servo bi-directional Turret Yes Available
54 Tailstock with hydraulic operated quill Yes Available
55 Slant / Integral type bed and LM guide ways for each axis Yes Available
56 Coolant tank Yes Available
57 Chip Tray Yes Available
58 Foot switch for Chuck & Tailstock Yes Available
59 AC spindle Drive and axis drive Yes Available
60 Auto and manual coolant system Yes Available
61 Closed pitch ball screw, supported at both ends, pre-tensioned preferable. Yes Available
62 Automatic centralised oil lubrication for guide ways and ball screw. Yes Available
63 STANDARD ACCESSORIES  
64 Electronic hand wheel (manual pulse generator) Yes Available
65 Built in lighting system Yes Available
66 Boring bar holder (4 nos.) Yes Available
67 Set of reduction sleeves Yes Available
68 3 jaw hydraulic chuck dia 200 mm (min). Yes Available
69 Programmable quill Yes Available
70 Full machine guard Yes Available
71 Coolant system Yes Available
72 Maintenance tool kit Yes Available
73 AC Spindle (Cartridge) Yes Available
74 AC Spindle Drive (Siemens make) Yes Available
75 AC Servo Axes Drive (Siemens make) Yes Available
76 Automatic programmable Centralised Oil Lubrication System Yes Available
77 Chip Tray to be provided Yes Available
78 Levelling screws and Mounting pads Yes Available
79 Machine operating manual and programming manual – 2 sets Yes Available
80 One set of installation, maintenance and spare parts manual Yes Available
81 Hard Jaws & Soft jaws 2 sets each Yes Available
82 Taper shank drill sleeves (MT-1, MT-2, MT-3) Yes Available
83 OD Tool holder clamping block Yes Available
84 Door safety interlock Yes Available
85 Fully enclosed splash guard with sight windows Yes Available
86 Fully encapsulated housing with safety type window Yes Available
87 Levelling pads Yes Available
88 STANDARD CONTROL FEATURES  
89 8.4'' or better color display Yes Available
90 Manual data input Yes Available
91 Alarm/ operation history display Yes Available
92 Self-diagnostics function Yes Available
93 Constant surface speed control Yes Available
94 Continuous Thread cutting cycles Yes Available
95 Feed rate override Yes Available
96 RS 232 interface / Ethernet / USB / LAN Port Yes Available
97 External memory and sub programme calling function Yes Available
98 Backlash compensation Yes Available
99 512 kb Part Programme storage memory Yes Available
100 Background editing Yes Available
101 Memory card input / output Yes Available
102 Hourly part count Yes Available
103 Colour graphics display Yes Available
104 Dynamic Simulation Display Yes Available
105 Panel AC Yes Available