TECHNICAL SPECIFICATION |
MODEL-SA-2H |
Table Size (Length x Width) |
1200x300 mm |
‘T’ Slots Nos/Width/Pitch |
3/16/65 mm |
Travels in X-Y-Z Axis |
800-260-400 mm |
Horizontal Spindle Axis to Table Surface |
0 – 400 mm |
Arm Travel |
450 mm |
Spindle Taper |
ISO-40 |
Speeds & Number of Steps |
|
Vertical |
60 – 1800 in 12 Steps |
Horizontal |
40 – 1300 in 12 Steps |
Feed Rates & Number of Steps |
X-Axis |
22 – 420 mm/min in 18-Steps |
Y-Axis |
22 – 393 mm/min in 18-Steps |
Z-Axis |
10 – 168 mm/min in 18-Steps |
X and Y-Axis Rapid traverse |
1200 mm/min |
Vertical |
500 mm/min |
Table Swivel In RH & LH |
45 Degree |
Power |
4kW |
Main Motor |
1.1kW |
Feed Motor – X, Y and Z |
0.5kW |
Coolant Motor |
|
Features |
|
Digital Read Out System for all Three Axes With 0.005 mm Resolution |
Built-in coolant tank in machine base |
Central lubrication for guide ways and lead screws. |
Chip / coolant protecting tray height wall should be appropriate to avoid spillage |
Coolant System & Forced Lubrication |
Accessories |
Universal machine vice-jaw width not less than 100 mm–minimum clamping capacity 150 mm |
Milling stub arbour ISO-40 collet adaptor(6-20 mm) ISO-40 with set of collets |
(Long arbour with dia 27mm & arbour supporter) |
Rotary table rack cutting attachment slotting attachment |
Spare Parts |
Maintenance kit: hand tools, grease gun etc |
Levelling screws and levelling pads |
With Standard Spare Parts |
With Operational / Maintenance Manuals |