| Type of Milling |
Vertical Milling |
| Mechanism |
Manually Operated |
| Table Total Area (Length x Width) (mm x mm) |
1520 * 310 |
| Table Clamping Area (Length x Width ) , mm x mm |
1350 * 310 |
| Width of T slots in mm |
16 |
| Number of T Slots |
3 |
| Centre Distance between T slots in mm |
65 |
| Table Transverse |
Manual & Automatic |
| Longitudenal Table Transverse in mm |
800 |
| Cross Table Transverse in mm |
265 |
| Vertical Transverse in mm |
400 |
| Swivel of Milling Head to either side in vertical plane for vertical milling in degree |
45 |
| Swivel of Table to either side of horizontal plane in Degree |
NA |
| Maximum Safe Load on table in KG |
350 |
| Number of Spindle Speed |
18 |
| Spindle Speed range in rev/min |
35.5 -1800 |
| Spindle Front Bearing Diameter in mm |
85.725 |
| Type and Size of Spindle Nose |
ISO -40 |
| Vertical Movement of Quill in mm |
70 |
| Vertical Quill Diameter in mm |
100 |
| Number of Feeds available |
18 |
| Feed range for Longitudinal in mm/min |
16-800 |
| Feed range for Transverse in mm/min |
NA |
| Feed range for Vertical in mm/min |
4 - 2000 |
| Rapid Transverse Feed range for Longitudinal & Cross in mm/min |
1 - 3200 |
| Rapid Transverse Feed range for vertical in mm/min |
1 - 800 |
| Max Feed Force in KN |
20 |
| Maximum Torque on Spindle in Nm |
125 |
| Required Floor Space in mm x mm |
2590*1960*1970 |
| ISO Compliance for Milling Machine |
ISO 40 for Medium Duty Milling Machine |
| Size of Milling Arbor |
As per ISO 40 for Medium Duty Milling Machine |
| Power Supply (V, Ph ,Hz) |
3 Phase, 415 V, 50 Hz |
| Spindle Motor Power in Kw |
5.5 |
| Spindle Motor RPM |
1500 |
| Feed Motor power in KW |
1.5 |
| Feed Motor RPM |
1500 |
| Coolant Pump Motor in kw |
0.11 |
| Coolant Pump Motor in RPM |
1200 |
| Noise level Emitted by Machine |
80 |
| Size of the machine (Lx W x H ) in mm |
2590*1960*1970 |
