|
|
Max. Safe weight on the table | 250 kg |
Center distance between t- slot | 65 mm |
Table size | 1350x250 mm |
POWER OPERATED TRAVERSES Longitudinal Cross Vertical |
800 mm 265 mm 400 mm |
Swivel of table (for Universal model only) | 45 deg. either side |
Speed range | 35.5-1800 rpm |
Spindle speeds | 18 |
Spindle nose | ISO-40 |
Compound slide travel | 45 deg. either side |
|
|
No of feed: Longitudinal & Cross | 18:16-800 mm/min. |
No of feed: Vertical | 18:4-200 mm/min. |
|
|
Longitudinal & Cross | 3200 mm/min. |
Vertical | 800 mm/min. |
Floor space | 265 X 320 X 210 cm |
Weight (Net/Gross) | 2500 kg |
Machine vice | IS: 4502/68 or IS 4502/99 |
Universal Dividing Head | IS: 8165/76 |
Stub Arbors | 27 X 21/25 mm |
|
|
Main motor | 5.5 kw/1500 rpm |
Feed motor | 1.5 kw/1500 rpm |
Coolant motor | 0.11 kw/3000 rpm |
Milling arbors | 27*500 mm |
Coolant equipment | IS: 2161/96 |
Casting | IS: 210/78 |
Casting hardness | 180-230 BHN |
Spindle | Forged suitable alloy stee |
Spindle hardness | 55 HRC |
Speed gears, spindle shaft, feed screws etc. | Alloyed steed forgings |
Standard colour | Apple green |
Noise emitted by machine | upto 85 Dba |
|
|
Electrical equipment 3 phase, 415 volts, 50 cycles AC supply, Climb milling attachment, Draw bolt with nut, Set of service tools, Operator's manual and Spare parts manual, Arbor support bearing brackets, Overarm brace, 160mm Dia Face Mill And Index able Inserts For Machining Steel, Cast Iron And Other Nonferrous Metals With Suitable Arbor. |
Table overall size