#

Universal Milling Machine

Specification of Universal Milling Machine   
Specifications Details
Confirmity to specification IS 6893 part 2 for Horizontal /Universal Knee Type Milling Machine Yes
Type of Milling Universal Milling
Table Total Area (Length x Width) (mm x mm) 1520 x 310
Automatic Lubrication to all slide Yes
Warranty in years 1
Erection And Commissioning Charges Included In Offered Prices Without Foundation Yes
Conformity to specification IS 6893 part 2 for Horizontal /Universal Knee Type Milling Machine Yes
Milling Arbor as per IS 8614 / DIN 6354 latest Yes
Mechanical Guarding as per IS 9474 latest Yes
Geometrical and Practical Accuracy as per IS 2200 latest Yes
Geometrical Accuracy test for inspection of the machine conforming to IS: 2201 – 1973 Yes
Machine standard As per IS: 210-1993 Yes
Type of Milling Universal Milling
Mechanism Manually Operated
Nature of Operation Medium Duty
Table Total Area (Length x Width) (mm x mm) 1520 x 310
Table Clamping Area (Length x Width ) , mm x mm 1350 x 310 
Width of T slots in mm 16 millimeter
Number of T Slots 3
Centre Distance between T slots in mm 65 millimeter
Table Transverse Manual & Automatic
Longitudinal Table Transverse in mm 800 millimeter 
Cross Table Transverse in mm 265 millimeter 
Vertical Transverse in mm 400 millimeter
Swivel of Milling Head to either side in vertical plan e for vertical milling in degree 45 degree
Swivel of Table to either side of horizontal plane in Degree ( for universal Milling Machine) 45 degree
Maximum Safe Load on table in KG 250 Kilogram
Number of Spindle Speed 18
Spindle Speed range in rev/min 35.5 -1800rpm
Spindle Front Bearing Diameter in mm 85.725 millimeter
Type and Size of Spindle Nose ISO-40
Number of Feeds available 18
Feed range for Longitudinal in mm/min 16 -800
Feed range for Transverse in mm/min 16 -800
Feed range for Vertical in mm/min 4-200
Rapid Transverse Feed range for Longitudinal & Cro ss in mm/min 1 – 3200
Rapid Transverse Feed range for vertical in mm/min 1 – 800
ISO Compliance for Milling Machine ISO 40 for Medium Duty Milling Machine 
Size of Milling Arbor As per ISO 40 for Medium Duty Milling Machine
Power Supply (V, Ph , Hz) 415v,3phase,50Hz
Spindle Motor Power in Kw 5.5 Kilowatt
Spindle Motor RPM 1500
Feed Motor power in KW 1.5 Kilowatt
Feed Motor RPM 1500
Coolant Pump motor in Kw 0.11 Kilowatt
Noise level Emitted by Machine as per IS 10988 latest in dB 80
Interlocking through switches for Medium Duty and Heavy Duty Yes
Shear Pin or mechanical over load coupling for feed drive For medium duty and Heavy Duty Yes
Flexible Motor Coupling against shock loading For medium duty and Heavy Duty Yes
Thermal Safety Over Load Relay Yes
Interlocking of spindle & feed Drive For medium dut y and Heavy Duty Yes
Control circuit switching off during Voltage drop Yes
Single phase preventer Yes
Positive clamping of all guide ways thru clamping p ads Yes
Streamlined construction, rigged and vibration free Yes
Power operated Feeds and Rapid traverse in all axis Yes
Independent main drive and feed drive Yes
Instantaneous braking of spindle and all Axis feed d rive for medium duty and heavy duty Yes
Inch push button for speed & feed drives Yes
Two nut arrangement with Climb Milling attachment for Longitudinal drive for medium duty and heavy d uty Yes
Feed & Rapid drive thru Electromagnetic clutch for Medium Duty and Heavy duty Milling Machine Yes
Separate plunger pump for spindle & feed drive lubrication for Medium Duty and Heavy Duty Milling Ma chine Yes
Automatic Lubrication to all slide Yes
Selection of Each Axis drive thru mechanical lever operated for Medium Duty and Heavy Duty Milling Machine Yes
Thermal Stability of bearing over excess temperatu re above 40 degree cel Yes
Electric equipment Yes
Erection And Commissioning Charges Included In Of fered Prices Without Foundation Yes
Machine casting of Column/Knee/Saddle /Table confi rms to Cast Iron Grade FG-260 & Hardness 180- 230 BHN Yes
Main Spindle of C2R grade forged Steel and hardene d 58-62 HRC Yes
Drive gears of Alloy steel material specification 15 N i 7 Cr 4 M02 Yes
Pre-loaded Standard make High precision class P3 s et of taper roller bearings for main spindle Yes
Dynamically balanced Spindle and other parts rrotat ing with peripheral speed of more than 3m/sec Yes
Draw Bolt with draw nut Yes
Elevating crank handle Yes
Two arbor support bearing bracket for horizontal & U niversal milling Yes
Over arm brace for vertical/horizontal & Universal mi lling Yes
Machine Lamp Yes
Service Tool kit for operation & maintenance Yes
Operation & Maintenance Manual Yes
Foundation bolts & levelling plate Yes
Machine vice with swivel base 200 mm Yes
Self-Centering vice 10-80mm Yes
Stub Milling Arbor dia 16,22,27,32 &40 mm Yes
Collet Holder with set of conical collets size 5,6,8,10, 12,& 20mm Yes
End mill holders dia 5,6,8,10,16 & 20mm Yes
Reduction sleeve type B size MT1,MT2, MT3 &MT4 Yes
Milling Arbor for horizontal & Universal milling size di a 22x500 &, dia 27x500mm Yes
Universal dividing head 135mm with tailstock, suppo rting block,3 jaw self-centering chuck dia 160mm &tr ain of gears for Universal Milling Machine only for res t Put NA (For Simple, Compound and Differential Ind exing) Yes
Vertical Milling head (Swivel of Milling Head to either side in vertical plane for vertical milling should be 4 5 degrees) Yes
Set of spares for normal running Yes
Parking bracket Yes