| TECHNICAL SPECIFICATION |
| MODEL-SA-2V |
| Table Size (L x W) |
1200 x 300 mm |
| T-Slots (No-Width) |
03-Dec |
| Longitudinal Movement |
|
| Automatic |
500 mm |
| Manual |
550mm |
| Transverse Movement |
|
| Automatic |
225 mm |
| Manual |
250 mm |
| Vertical Movement |
|
| Automatic |
325 mm |
| Manual |
375 mm |
| Spindle : Quill Stroke, Manual |
70mm |
| Milling spindle front bearing Dia |
70mm |
| Spindle taper |
ISO 40 |
| Vertical milling head swivelling to both side |
45 Degree |
| Speed range |
45-2000 RPM |
| No./Progression |
12/1.4 |
| Feed: |
|
| No. of Feeds |
18 |
| Feed range |
Progression 1.25 |
| Longitudinal |
20-700 mm/min |
| Transverse |
20-700 mm/min |
| Vertical |
10-200 mm/min |
| Rapid Traverse Longitudinal/traverse |
2500 mm/min |
| Vertical |
750 mm/min |
| Milling spindle motor |
3kW |
| Feed motor |
0.75 kW |
| Max. safe weight (Job) on the table |
150 Kg |
| Features |
| Rigid Spindle Housing, Cross ribbed box type column structure and Optimum spacing of precision taper roller bearings to ensure vibration free cutting. |
| The table, knee, slide in dovetail guide ways. Three lever control for spindle speed selection. Three lever control for feed selection. |
| Centralized lubrication for guide ways and lead screws |
| Splash lubrication for speed and feed gearing. |
| Chip / coolant protecting tray height wall should be appropriate to avoid spillage |
| Accessories |
| Plain Machine Vice-jaw width not less than 100 mm–minimum clamping capacity 150 mm |
| Milling Stub Arbour ISO-40 Collet Adaptor(6-20 mm) ISO-40 with set of collets |
| Rotary Table Rack Cutting Attachment Slotting Attachment |
| Coolant System & Forced Lubrication D.R.O on all or X and Y axes, 0.005 mm resolution |
| Spare Parts |
| Maintenance Kit: Hand Tools, Grease Gun etc |
| Levelling screws and levelling pads |
| With Standard Spare Parts |
| With Operational / Maintenance Manuals |
