Technical Specification |
MODEL-JK-RADM-600 |
•Radial arm Drill machine Motorized With Tapping Attachment |
•Capacity: |
Drilling In Steel (600 N/mm2 Tensile Strength) : 32 mm |
•Drilling In Cast Iron: |
35 Mm |
•Rough Boring In Steel : |
50 mm |
•Rough Boring In Cast Iron : |
60 mm |
•Tapping In Steel: |
M27 |
•Tapping In Cast Iron : |
M30 X 3 |
•Drill Head: Spindle Nose : MT4 Spindle Nose Outside Diameter : 55 Mm |
•Quill Outside Diameter : |
60 Mm |
•Spindle Travel (drilling Depth) : |
225 Mm |
•No. Of Spindle Speeds: |
8 No. |
•Spindle Speed Range : |
30-2000 Rpm |
•Number Of Power Feeds : |
6 No. |
•Power Feed Range : |
0.032-0.315 Mm/rev. |
•Working Range: Drilling Radius Max/min. : 900/350 Mm |
•Column Diameter : |
220 Mm |
•Vertical Power Movement Of Arm : |
500 Mm |
•Horizontal Movement of Drilling Head : |
550 Mm |
•Base Plate: Height Of Base Plate : 150 Mm |
•Working Surface : |
1000x780 Mm |
•No. /center Distance of T-slots : |
3/200 Mm |
•Width Of Cast T-slots : |
22mm |
•Power: Drilling Motor : 3.5kw /1500 Rpm |
•Elevating Motor For Arm :1.5kw /1500 Rpm |
Features: |
•Induction hardened guideways of radial arm. |
•Hardened and precision ground gears in main drive. |
•Coolant tank with motorized Coolant System Built-in lighting system. |
•Lighting lamp will be auto rotary / tilting as per requirement Leveling screw with pad. |
•Electrical equipment complete for wiring of 3 Ph 415 V 50 Hz supply. |
Accessories: |
•Drill Chuck with Chuck key size MT3, Sleeves MT1- MT3, Machine Vices Drift tapping attachment, Box Table of appropriate size. |
Spares and consumables (for 2 years): |
•Drill Chuck -1 No, Drill Chuck key – 5 Nos, Drill drift – 2 Nos, On/Off Push Button -2Nos. |
•Maintenance Kit: Hand Tools, Grease Gun, Levelling screws and levelling pads |
•Manual |