TECHNICAL SPECIFICATION |
|
MODEL |
JK-MCL-550 |
Swing over bed |
550 mm or above |
Swing over saddle |
250 mm or above |
Turning diameter |
300 mm or above |
Bar working diameter |
45 mm or above |
Distance between centers |
500 mm or above |
Spindle speed range (RPM) |
50-4000 or above |
Spindle nose/bore |
50 mm or above |
Number of tool stations |
08 |
Max boring bar size |
35 mm |
Tool shank size |
25 x 25 mm |
Indexing time |
Not more than 0.5 Sec |
Turret type |
Bi-directional |
Bed type |
Horizontal |
Tail stock quill diameter |
60 mm or above |
Tail stock quill movement |
100 mm or above & programmable |
CNC control |
Fanuc or Siemens |
Cross slide travel |
130 mm or above |
Saddle travel |
300 mm or above |
Rapid traverse rate |
15 m/min in X-axis, 20 m/min in Z-axis |
Power |
3 Phase 50 Hz 420 V |
Program storage capacity |
200 and above |
Drill Chuck with mandrel |
|
ACCESSORIES |
|
Automatic lubricating unit |
|
Step down transformer |
|
Automatic Bar feeder unit |
|
Cabinet cooler AC system |
|
Chip conveyer with chip bin |
|
Collet chuck with collet set (2mm to 40 mm) |
|
Hydraulic chuck with 3 jaw set(1-soft, 2-hard) |
|
Voltage stabiliser |
|
Standard coolant system (fluid based) |
|
Tailstock with built in revolving center |
|
All standard accessories and Tool kit for machine and coolant system. |