TECHNICAL SPECIFICATIONS

MODEL

JK-RD-70

Feed Range

0.0032 – 0.04 mm/rev (12 steps)

Spindle RPM

30 -1400 (above10 step)

Spindle Taper

MT 3 or above

Clamping

Hydraulic based (1 HP or above)

Tapping capacity

50 mm or above

Drilling Capacity

70 mm or above

Column Diameter

500 mm or above

Distance from column to spindle center

3000 mm or above

Travel of head on arm

2000 mm or above

Base to Spindle end

3000 mm or above

Elevating height of Arm

800 mm or above

Height of Column from base

3500 mm or above

Stroke of spindle

Power Supply

3 Phase,415 V,50 Hz

Main Motor Power

8HP or above

Elevating motor

4 HP or above

Coolant motor

¼ HP or above

Coolant system

Fluid based

Machine base size (LxWxH)

4000 x 1000 x 300mm

Illuminition facility

YES

Accessories

Tilt table 90 degrees

Heavy duty vice with handle (10 inches or above)

Swivel vice with handle (10 inches or above)

Set of sleeves for spindle with drift

Drill chuck with mandrel and chuck key(12 mm or above)

Keyless drill chuck with mandrel

Standard Tool kit