TECHNICAL SPECIFICATIONS |
|
model |
JK-SCL-300 |
Swing over bed |
300 mm or above |
Swing over saddle |
200 mm or above |
Turning diameter |
200 mm or above |
Bar working diameter |
30 mm or above |
Spindle Bore |
40 mm or above |
Number of tool station |
08 |
Spindle speed |
50 to 3000 RPM |
Tail Stock (Quill movement) |
100 mm or above & programmable |
Tool shank size |
25 x 25 mm |
CNC control |
Fanuc or Siemens |
Positional Accuracy (X & Y axis) |
0.008/100 in X axis and 0.012/300 in Y axis |
Repeatability(mm) |
X:Y = + 0.002 : + 0.003 |
Indexing time |
Not more than 0.5 Sec |
Cross slide travel |
100 mm or above |
Power |
3 Phase 50 Hz 420 V |
Program storage capacity |
200 and above |
Bed type |
Horizontal |
Accessories |
|
Automatic lubricating unit |
|
Step down transformer |
|
Cabinet cooler AC system |
|
Chip conveyer with chip bin |
|
Automatic Bar feeder unit |
|
Collet Chuck with collet set (2mm to 30 mm) |
|
Hydraulic chuck with 3 jaw set(1-soft, 2-hard) |
|
Voltage stabiliser |
|
Standard coolant system (fluid based) |
|
Tailstock with built in revolving center |
|
All standard accessories and Tool kit for machine and coolant system. |
|
Various spares required to be changed in short intervals. |