ALL GEARED SS AND SC CENTER LATHE

ALL GEARED SS AND SC CENTER LATHE

MAKE : JK/ MODEL : JK-H31

TECHNICAL SPECIFICATION
Centre height 270 mm
Centre distance 1015 mm
Length of Bed 2130 mm
Width of Bed 325 mm
Height of Center 270 mm
Swing over Bed 525 mm
Swing Over Cross Slide 325 mm
Spindle Hollow 55 mm
No. of Spindle Speeds 12
Range of Spindle Speed (RPM) 30- 1235
Range of T.P.I. Thread Cut 02 TO 60
Range of M.M. Thread 0.05-15
Taper in Tail Stock MT-4
Motor ABB Make, 3 HP, IE3,
Accessories :
Foot Brake ? Face Plate ? Control panel with on/ off switch ? Thread Indicator Dial ? Chip Tray ? Rear splash guard with window ? 14� x 4 jaw chuck with flange ? V-Belts set ? Machine lamp ? Coolant tank with pump ? 14? x 3 jaw self centering chuck ? Cutting tool holder inserted type for turning, threading , boring with inserts for each holder cutting off steel material ? Quick Change Tool Post Set with holder & keys ? Steady Rest fix & traveller bearing type ? chuck guard ? Set of anti vibration pads ? Set of allen keys & spanners set ? Tools trolley
Features :
Lathe bed is of close grained alloy castings duly flame hardened and ground with brinell hardness of over 300 bhn. ? Head stock gears of special alloy steel duly hardened and profile ground. ? Headstock spindle of a 2/6 mounting type is hardened and ground and runs in anti friction taper roller bearings. ? Quick change norton type gear box provides wide range of inch / mm threads & feeds switch shaft for forward / reverse rotation of spindle. ? Accuracy as per is: 1878 (part i) 1993. ? Net weight of machine- 1600kg Approx. (Heavy Duty Machine)
ALL GEARED SS AND SC CENTER LATHE

ALL GEARED SS AND SC CENTER LATHE

MAKE : JK/ MODEL : JK-H31

TECHNICAL SPECIFICATION
Centre height 270 mm
Centre distance 1015 mm
Length of Bed 2130 mm
Width of Bed 325 mm
Height of Center 270 mm
Swing over Bed 525 mm
Swing Over Cross Slide 325 mm
Spindle Hollow 55 mm
No. of Spindle Speeds 12
Range of Spindle Speed (RPM) 30- 1235
Range of T.P.I. Thread Cut 02 TO 60
Range of M.M. Thread 0.05-15
Taper in Tail Stock MT-4
Motor ABB Make, 3 HP, IE3,
Accessories :
Foot Brake ? Face Plate ? Control panel with on/ off switch ? Thread Indicator Dial ? Chip Tray ? Rear splash guard with window ? 14” x 4 jaw chuck with flange ? V-Belts set ? Machine lamp ? Coolant tank with pump ? 14? x 3 jaw self centering chuck ? Cutting tool holder inserted type for turning, threading , boring with inserts for each holder cutting off steel material ? Quick Change Tool Post Set with holder & keys ? Steady Rest fix & traveller bearing type ? chuck guard ? Set of anti vibration pads ? Set of allen keys & spanners set ? Tools trolley
Features :
Lathe bed is of close grained alloy castings duly flame hardened and ground with brinell hardness of over 300 bhn. ? Head stock gears of special alloy steel duly hardened and profile ground. ? Headstock spindle of a 2/6 mounting type is hardened and ground and runs in anti friction taper roller bearings. ? Quick change norton type gear box provides wide range of inch / mm threads & feeds switch shaft for forward / reverse rotation of spindle. ? Accuracy as per is: 1878 (part i) 1993. ? Net weight of machine- 1600kg Approx. (Heavy Duty Machine)